Can you build a pergola on pavers




















We recommend you contact an independent contractor in your area to conduct a site visit to properly assess the need. Any ground screw recommended? Try sourcing Pylex Foundation Screws. Lowes, and Home Depot should hold supply. They can support up 5, pounds per screw. The canopy is structured for ground so it would be a 2 part job? Yes most structures can be anchored to an existing deck.

Anchor your post to the deck joists, not the deck boards. Any advice on attaching to paver stones? It would depend on the size, thickness and weight of the paver stone. Smaller pavers may crack when drilling into them, they also wont provide much support from an anchoring perspective. Usually a safe bet to anchor to concrete footings or the frame of a deck.

Just for clarification — would the wood posts sit on top of the pavers with the anchors going through into the footing? Or the posts sitting directly on the footing with the pavers cut around the post? Thank you very much for sharing this article. The weight is lbs will this still require concrete footings on a brick paver patio? What other options are there for mounting? I have considered making my own template and casting my own pavers using Quickrete Yes, it would be time consuming, but I would be saving any money this way?

I would be able to cast my own shapes and make it custom for sure. I just don't know how many pavers that bag would be equivalent to. Create proper concrete footings that the pergola can be attached to and then lay the pavers and then build the pergola. Thanks Greg. That does make sense now that I look at some photos online. I see people have created small footings or columns around the legs. Please help me make this patio a place to relax and enjoy.

Patio w. Back Yard Paver Patio. Indem Sie weiterhin auf der Website surfen bzw. Mehr erfahren. Ultimate Lighting Sale. Bathroom Vanity Sale. Bestselling Chandeliers and Pendants. Sign In. Join as a Pro.

Houzz TV. Houzz Research. Shop Featured Holiday Categories. Home Decor. Holiday Decor. Christmas Trees. Holiday Lighting. Gift Cards. Can you place a pergola on top of a patio made of pavers? Jared Delaney 2 years ago. Email Save Comment 3. I know ideally I should have planned the pergola before hand and set the posts first or at least left a few of the pavers out, but alas foresight wasn't one of my strengths here. So, the question now is how do we anchor the pergola to the patio?

We don't want to anchor to the house I don't know the specifics about the pergola but here is a suggestion about anchoring it. Set your pergola legs on the patio and mark them. Use a screwdriver or flat nail bar to pry up only the pavers where the legs will go. Use one of those augur type bulb planter to drill a hole into the soil where the pavers were removed. Place the legs in the holes and pour concrete into the hole and around the leg. Smooth it out and cover the space where the paver was.

You can color the concrete by spraying it with ironite fertilizer to stain it a brown or rust color or with copper spray to change it to bluish-green. Since there is minimal disturbance of paving units and sub-grade, the steel rod approach your link described, is an easy method for securing the pergola posts to an existing paved surface. However, if a typical system of horizontal beams and stringers are used, and support posts are sized sufficiently, a 12' x 12' pergola is on the large side and quite heavy.

I personally don't think the 3" bluestone is capable of supporting that dead-load - without potential failure. Cracking could occur and without diagonal bracing at the beam to post connections, there may not be enough lateral resistance to prevent the whole freestanding structure from racking.

Consider setting concrete footings such as tsmith recommends. I would however, approach it in a different way. Remove the paving stones at each proposed post location to provide enough clearance for digging holes deep enough to go below the frost line of your area. Choose a method of digging, either with a manual post-hole digger, or a rented, gas-engine post hole auger.

I imagine your posts will be at least 6 x 6s - perhaps even 8 x 8s. If you elect to use posts embedded directly into concrete for maximum stability - accept the fact that regardless of using PT pine or cedar, the posts will eventually rot - even with a canted concrete top for water drainage.

Consider this method as an alternate: Dig a hole at least 10" in diameter, and set each post over a compacted bed of gravel or crushed stone below frost. The use of compacted crushed stone poured into the spaces around each post, allows ground water to be irrigated down past the posts before it has a chance to rot the wood. Add the stone in 6" lifts, compacting each layer with a tamping post. Fill the holes up to the sand base, cut each paver and reset as necessary.

Another proven technique is to cast round galv. The round posts would extend into holes drilled into each post bottom - then secured by through-bolts, countersunk and plugged. The plate ends extending from the concrete footing would fit into slots cut into each post bottom, then through-bolted such as with the round post method. This sounds like a fun project and will enhance the great job you've already completely on the patio.

But in my opinion, there is no easy way out for securing the pergola, for ensuring the longevity of the structure and the safety of your family and guests who may enjoy it.

What should I do with concrete patio? To pergola or not to pergola? Backyard peeps!! Pergola too high? Patio Design Help!



0コメント

  • 1000 / 1000